CLASS-1 MUMBAI MMD ORAL QUESTIONS PART-8

0
650

Date – 21-02-2020

Internal – Vikrant rai sir

External – Pal sir

Q. Started with introduction and experience.

Q. Registration of ship.

Q. ESP: Have you seen ESP? how does it looks like?

Q. Why coating is required, types of coating. explained hard coating (epoxy coating..)

Q. What is galvanization, Impressed Current cathodic protection system what is function of reference anode.

Q. How you will reduce GHG from running ship.

Q. What we are achieving from regulation 22A Marpol.

Q. What is cold ironing?

Q. What is Difference between Unclos and IMO. What do you mean by frame work Convention?

Q. What is Statement of Compliance and what is difference between statement of compliance and certificate of compliance.

Q. What is FUND convention

Internal questions:-

Q. What is Cold ironing? What do you want to achieve from that.

Q. What is requirement of dry dock, expained requirement?

Q. What do you want to achieve from regulation 22A Marpol.

Date – 21-02-2020

Internal – Vikrant Rai Sir

External – Pal Sir

Q. Introduction and experience

Q. Type of ships and ME you have done

Q. What is RO code & it’s purpose

Q. ESP Code, ESP for oil tankers in details & what all surveys under  ESP

Q. You have non-compliant fuel onboard, what will you do as CE

Q. Has India ratified BWM convention. If vessel from other country who has ratified, comes to India, then can PSC carryout inspection of vessel wrt BWM and why?

Q. What is SSP & who prepares it?

Q. What is difference between SSO & CSO?

Q. What is Marking and Carving note, who issues it & whole procedure with respect to registration of Ship?

Internal questions:-

Q. Since you have done ME-B engines tell me what technical problem you have faced on ship & how you tackled the problem.

Q. UR CE, 2E is phillipino & 3E is Indian, 3e always keeps complaining about 2e, what action you will take as CE.

Date – Unknown

External – Pakrashi sir

Internal – kamath sir

Q. ITLOS where is headquarter and any case Indian case in ITLOS

Q. PODA

Q. Bank garuntee and letter of credit

Q. Ism code, entry into force, 1st major amendment eif  and it’s detail, ism applicable to which ships

Q. Statutory certificate on tankers, who issue afs certificate and it’s validity

Q. what are the legal system used in marine industry

Q. what is reg 22 in marpol annex 1

Q. Onshore complaint procedure, to whom complaint in Indian port, who is the highest authority in India and timelines for complaints

Q. onload and offload mechanism of lifeboat

Q. Review in ism, input to management review

Q. welding onboard what will you do as CE he wants technical aspect kamath sir

Date – Unknown

External – Kamath sir

Internal – Gadkar sir

Q. Experience as 2nd

Q. Type Ship sailed

Q. Ism elements relevant to ce

Q. N.C how to close NC

Q. Certificate as per statutory surveys convention vice

Q. PA & GA

Q. Types of insurance

Q. Which insurance covered by whom then followed to clc buker conv who pays in whom

Q. Tier 1,2,3

Q. New amendment in 2020 in marpol

Q. III code

Internal questions:-

Q. Class vs statutory survey

Q. How Propeller manufactured casting or forging, crack in propeller how to find non destructive test which to perform on propeller to find crack

Date – Unknown

External – Kamath sir 

Internal – Gadkar sir

Q. Experience as 2nd,  on LNG Ships

Q. What is special survey?

Q. How is your dfde ship efficient than steam propulsion ship.

Q. what is methane slip.

Q. Explain millers cycle

Q. Draw and explain Otto cycle,diesel cycle

Q. Microbial degradation  n what are your actions as CE

Q. Explain Sulphur cap 2020,what is your action as CE if there is non complaint fuel onboard

Q. Enclosed spaced entry procedures & details about the permit, what are the hazards in cleaning f.o tanks

Date – Unknown

External – Kamath sir

Internal – Gadkar sir

Q. Type of ships done

Q. Type of cargoes carried and properties

Q. Hong kong convention and how u implement

Q. Nairobi wreck convention and def of wreck

Q. Latest fuel oil edition and what fuels introduced and explain

Q. Load line survey  and how you prepare

Q. hssc  and survey details

Q. Propeller curve

Q. bwms and def of active substance

Q. bridge equipments VDR, AIS and speed log

Date – 18-03-2020

Q. 3 tiers of oil pollution damage compensation

Q. Hot and cold corrosion, how to distinguish cold corrosion?

Q. EGE tube leak indications and how to locate leaking tube, draw dig?

Q. CSM

Q. Tailshaft monitoring

Q. H&M and P&I scope

Q. Laycan and laytime

Q. GA & PA

Q. All conventions and their respective certificates

Q. Loadline survey scope

Q. Watertight and weather tight acess

Date – 18-03-2020

Internal – Gadkar sir

Q. 3 tiers of oil pollution damage compensation

Q. TMON

Q. Bulk carrier Damage and Intact stability

Q. Draw tailshaft end

Q. What are various drydock plans,draw capacity plan?

Q. Draw propeller curve.what is its significance and how u will check.

Q. Co2 system checks

Q. Tailshaft removal and criteria for it

Q. ESP

Q. MOU ?when formed,how many?Risk Profile?

Q. Solas and Marpol Applicability

Q. Substantial corrosion, why is it so specific in ESP. who decides allowable limits for thickness

Q. HK recycling ship goes for recycle, what happens to ships certificates?