CLASS-1 MUMBAI MMD ORAL QUESTIONS PART-8
Date - 21-02-2020
Internal - Vikrant rai sir
External - Pal sir
Q. Started with introduction and experience.
Q. Registration of ship.
Q. ESP: Have you seen ESP? how does it looks like?
Q. Why coating is required, types of...
SAFETY REGULATIONS FOR DIFFERENT TYPES OF SHIPS
Basically there are no universally relevant definitions
of ship types, particular descriptions & names are used within IMO treaties
& the conventions. The following is the list ship types defined in several
IMO instruments:
A passenger ship is...
SOME BASICS Q & A PART- 4
Candidates should know about starting air explosion and crankcase explosion, causes, remedy and action.
Q: What inspections is carried out on piston ring?
i) Axial clearance .
ii) Butt clearance
iii) Ring thickness
iv) Radial thickness
v) Ring tension
Q: What...
MEO CLASS IV FUNCTION-4b (MEOL) ORAL QUESTIONS PART-1
MAIN ENGINE, MAIN ENGINE SHAFTING AND RELATED SYSTEMS
Q. During manoeuvring, how will you know leakage in Air starting valve?
Q. T/C surging. Procedure to follow during departure of main engine?
Q. Purpose of negative cam in...
SOME BASICS Q & A PART- 3
Codes of safety working practices:
Candidates must be familiar with a book “code of safe working practices” available on board vessels. It is very important to identify safeties to encounter hazards.
To be complied with the...
CLASS-4 KOLKATA MMD ORAL QUESTIONS PART-10
Function - 4b, 6
Q. What Engine you sailed
Q. OMD alarm, What action you take.
Q. Main Engine Interlocks
Q. Steering Gear Safeties
Q. Boiler Water Chloride level , and what you will do if not in the...
INTACT STABILITY CODE
IMO has developed intact stability standards for various types of ships, leading to the completion of the Code on the Intact Stability for All Types of Ships Covered by IMO Instruments intact stability(IS Code)...
SOME BASICS Q & A PART 1
What is I.S.M. ?
The International Management Code for the Safe Operation of the Ships and for Pollution Prevention (International Safety Management (ISM) Code).
What is I.M.O. Convention ?
Conventions are main instruments of IMO, being binding...
CLASS-4 KOLKATA MMD ORAL QUESTIONS PART-1
Function - 4b
Surveyor - Bannerjee sir
Q. Type of M/E
Q. Function of entablature, what it does, why given
Q. what is light spring diagram, what information it gives, what is light spring, why light spring is...
CLASS-4 KOLKATA MMD ORAL QUESTIONS PART-6
Function - 4b, 6
Surveyor - Sarkar sir
Q. Liner inspection.
Q. PID control details, where used
Q. IHL safety valve in boiler, What is COD, floating liner.
Q. Difference between ME and AE governor and cross Question
Q. when...