LATEST SOLAS & MARPOL AMENDMENTS

MARPOL 1) 1st  March 2018 – Data collection system for fuel oil consumption on ships. IMO documents : MARPOL...

BASIC CONCEPT OF INTELLIGENT ENGINE

central electronic control system is the brain of the system which monitors and evaluate the general condition to keep the operating parameter within limits and keep the performance of...

LATEST AMENDMENTS MARPOL

MARPOL ANNEX  I MEPC Resolution 248(66), reference (g) adopted amendments to Regulation 28 of MARPOL Annex I requiring oil tankers constructed before 1 January 2016...

CYLINDER LUBRICATION UPDATE

Introduction: In this update, we will be discussing the following points Simplifying  the lubrication process on-board the ships ...

NOx control

The NOx(Nitrogen oxide) control requirements of Annex VI applies to installed marine diesel engine of over 130 kW output power other than those used solely for emergency purposes irrespective of the tonnage...

EXHAUST VALVE

Before mark v engine i.e. before 1991 man engines had throttle valves which works to dampen the exhaust valve closing also the thermal expansion of oil is...

EXHAUST GAS CLEANING SYSTEM (EGCS) REQUIREMENTS

1. REGULATORY REQUIREMENTS 1.1. From 1 January 2020, the limit for Sulphur in fuel oil used on board ships operating outside designated emission...

LATEST SOLAS AMENDMENTS

Amendments to Forms C, E and P in the appendix to SOLAS certificates Requirement SOLAS Resolution ...

CAST IRON & ITS WELDING

Cast iron is widely used for engine components such as blocks, heads, and manifolds; for drive components such as transmission cases, gearboxes, transfer cases, and differential cases;...

AMENDMENTS ENTERING INTO FORCE ON 1ST JANUARY 2020

Amendments entering into force on 1st January 2020 for all ships Marpol annex vi, Reg 14, MEPC.280(70) Chapter 3 - Requirements for control...

Block title

Recent Posts