class II

The lows peed marine two-stroke engine development process is characterised by a few particularities such as decentralised production, the sheer size of the engines, broad use of HFO and the volatility of the shipping business as a whole,...

What ships does the MLC, 2006 apply to? The MLC, 2006 defines a ship in Article II, paragraph (1)(i) as“a ship other than one which sails only in internal waters or waters within, or closely adjacent to, sheltered...

IMO was formed to accept regulation & Governments are accountable for applying them. When a Government accepts an IMO Convention it agrees to make it part of its national law and to enforce all of the...

Date - Unknown External - S Rajendran Sir Internal – Kamat Sir Function-3 Q. What is Marpol? Annex II, how much residual oil can be allowed to retain. Q. Marpol discharge criteria for annex II, Categories X,Y,Z. Marpol regulation...

Port State Control (PSC) is the checking of foreign ships in the national ports to confirm that the condition of the ship & its equipment satisfy with the conditions of the international regulations & that the ship...

The safety of life at the sea has been a matter of responsibility to the IMO since its formation, & in this time many regulations & conventions have been accepted to enhance operational safety conditions. One way of...

1 January 2018 - Revised FAL Convention The revised Annex to the Convention on the Facilitation of International Maritime Traffic (FAL) includes mandatory requirements for the electronic exchange of information on cargo, crew and passengers.The...

Q, Analyze the advantages and disadvantages of implementation of ISM code on ships. Would you recommend implementation of ISM code on your ship? Give convincing reasons for your recommendation. Answer:- The main objectives of the ISM...

Automatic identification systems (AIS) are developed to provide information about the ship to other ships and to coastal authorities automatically. Regulations for carriage of AIS Regulation 19 of the SOLAS Chapter V - Carriage requirements...

Brinell hardness test Rockwell hardness test Vickers hardness test Pendulum test Charpy testI-zode test Fatigue test Bending test Non destructive Test VisualMicroscopyRadiographyDPTUltrasonicMagnetic particle Radiography Test DPT FatigueQuenchedGrindingOverloadImpactPorosityPin holesLack of fusion Steps used in the DPT  experiment: 1. Clean the surface with...