CLASS-4 KOLKATA MMD ORAL QUESTIONS PART-6
Function - 4b, 6
Surveyor - Sarkar sir
Q. Liner inspection.
Q. PID control details, where used
Q. IHL safety valve in boiler, What is COD, floating liner.
Q. Difference between ME and AE governor and cross Question
Q. when...
CLASS-4 KOLKATA MMD ORAL QUESTIONS PART-2
Function - 4b
Surveyor - Biswas & Rao sir
Q. VIT in Sulzer. How fuel quantity is adjusted. How Eccentric is connected. Where connected.
Q. Boiler tubes Construction. Draw. Material.
Q. What is Caustic Embrittlement. Which area, what...
CLASS-4 KOLKATA MMD ORAL QUESTIONS PART-1
Function - 4b
Surveyor - Bannerjee sir
Q. Type of M/E
Q. Function of entablature, what it does, why given
Q. what is light spring diagram, what information it gives, what is light spring, why light spring is...
IMPORTANT DATES
Conventions:-
SOLAS – Came in force on 25th May 1980
MARPOL – Adopted in 1973, Protocol-78, Came in force from 2nd oct. 1983.
STCW – Came in force from 28th April 1984.
MLC – Adopted in 2006, Came...
LATEST SOLAS & MARPOL AMENDMENTS
MARPOL
1) 1st March 2018 – Data collection system for fuel oil consumption on ships.
IMO documents : MARPOL Annnex 6, regulation 22, 5000GT & above.
Entry in to force(EIF) under tacit acceptance procedure : 1st March...
SAFETY REGULATIONS FOR DIFFERENT TYPES OF SHIPS
Basically there are no universally relevant definitions
of ship types, particular descriptions & names are used within IMO treaties
& the conventions. The following is the list ship types defined in several
IMO instruments:
A passenger ship is...
MEO CLASS IV FUNCTION-5 (EECEOL) ORAL QUESTIONS PART-3
Q. What is the meaning of power factor?
Ans- Power factor is the cosine of the angle between voltage and current waveform.
Q. How can it be improved?
Ans- Power factor improvement capacitor banks are used if...
MEO CLASS IV FUNCTION-6 (MROL) ORAL QUESTIONS
MAIN/AUX ENGINES AND RELATED SYSTEMS
Q. How to take butt clearance?
Q. Generator exhaust temp onboard
Q. Cooling water temp, pr onboard
Q. Lube oil temperature and pressure onboard
Q. How to measure ovality of connecting rod?
Q. How piston...
MEO CLASS IV FUNCTION-4b (MEOL) ORAL QUESTIONS PART-2
Q. Power imbalance and catalytic fines xyz
Q. Draw manoeuvring diagram, tell the position of fuel cam while stopping and few more question on it.
Q. Draw lube oil circuit of your main engine and what...
MEO CLASS IV FUNCTION-4b (MEOL) ORAL QUESTIONS PART-1
MAIN ENGINE, MAIN ENGINE SHAFTING AND RELATED SYSTEMS
Q. During manoeuvring, how will you know leakage in Air starting valve?
Q. T/C surging. Procedure to follow during departure of main engine?
Q. Purpose of negative cam in...